Hi all, I have bought a MONO2410 development board from developmentboard.net, whose specifics are as below:
Samsung S3C2410A (up to 266+ MHz)
64Mbyte NAND Flash
32Mbyte SDRAM (16 bit)
One 41pin LCD Display interface (STN or TFT) (supporting resolution up to 1024 x 768)
One 10MBit interface (CS8900)
Three serial ports available through 14pin (2.0mm space) interface
One USB Host and one USB Device
Real Time Clock
One 20pin standard JTAG interface
Four Status LEDs
One Reset Button
Four User defineable Buttons
IDE44 port for 2.5" hard disk Device support
One SD/MMC card socket
The board is nice, inexpensive. It came with English manual which guided me to make some experiments in uCLinux and WinCE environment, however I am thinking of doing more experiments in some more different environment. So, could someone of you recommend me some other RTOSes that can run on such a board?
Thanks in advance!
RTOS for S3C2410 Dev board?
1 reply to this topic
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users