Jump to content
Sign in to follow this  
Limitation//Moon

TIPS 'N' TRICKS 4 WINDOWS 'XP' but be PATIENT

Recommended Posts

I cut and pasted these from a web site about 3 years ago and still refer to some of them today! JUST BE PATIENT .

 

Unfortunately, it was that long ago I cant remember where I got them from.

 

I divided them up into various O/S's, so I will post them in seperate threads to make searching easier!

 

 

Windows XP tips

 

Change Out Your Pointer Scheme

 

Tired of seeing your pointer as an arrow or an hourglass all the time? Windows XP offers a number of alternative pointer schemes, such as Dinosaur, Ocean and Sports.

Open the Control Panel, double-click Mouse, and select the Pointers tab. (If you start in Category view, select Appearance and Themes, then click Mouse Pointers under "See Also.") Next to Schemes, click the down arrow and select a scheme to preview its pointers. Click OK to apply the scheme to your desktop. Simple as that.

 

--------------------------------------------------------------------------------

 

Check Out the Read1st File First

 

When you’re ready to install Windows XP, what are the first two things you should do? First, place the installation CD into your CD drive, but do not start Setup. Instead, click Browse this CD, open the file named READ1ST.txt, and then go read it. This file contains a variety of useful information including:

Last minute information that did not make it into other documentation.

Selected pre-installation information.

A roadmap that will help you find other useful text files.

 

--------------------------------------------------------------------------------

 

Use the ultimate configuration tool (Professional Edition only)

 

One of the most full featured Windows XP configuration tools available is hidden right there in your system, but most people don't even know it exists. It's called the Local Group Policy Editor, or gpedit for short. To invoke this editor, select Start and then Run, then type the following:

gpedit.msc

After you hit ENTER, you'll be greeted by gpedit, which lets you modify virtually every feature in Windows XP without having to resort to regedit.

 

--------------------------------------------------------------------------------

 

Want to remove MSN Messenger?

 

A lot of people want to know how to remove the MSN Messenger service from XP... here's how:

Locate SYSOC.INF in the \Windows\INF folder (hidden file and folder), Open it in Notepad and locate the line: msmsgs=msgrocm.dll,OcEntry,msmsgs.inf,hide,7

Remove the word "hide" from the line and save the file. You will now have an entry in add/remove programs. Do what you will

OR (XP Pro Only) leave it installed, but tell Windows to never let it run. If you're running XP Professional, you can use GPEDIT.MSC to prevent Messenger from loading. Otherwise, even disabling it in startup won't cause it to "always" not run. NOTE: Outlook, Outlook Express and some Microsoft web pages can still make it load.

Start, Run and enter GPEDIT.MSC

Computer Configuration > Administrative Templates > Windows Components > Windows Messenger

You can now modify whether it starts initially and/or whether it's to run at all.

UPDATE: I have recieved some email that say this fix slows down outlook when starting, that is because outlook wants to start messenger when it starts, the easiest and fastest way to disable messenger and still have a quickj starttime with outlook is to rename the exe file, located here c:\program files\messenger\msmsgs.exe, to something other than msmsgs.exe, such as msmsgsnew.exe.

 

--------------------------------------------------------------------------------

 

Know your rights

 

Windows XP comes bundled with Windows Media Player 8.0. While Media Player plays just about any digital media file format--it supports 35, including MP3, it records music only in the Windows Media Audio, or WMA, format. The reason? Content protection.

When recording, or ripping, music from CDs, Media Player allows you to make protected recordings so that no one will be able to copy the recording from one computer to another. You can turn copy protection on or off on the Copy Music tab by checking or unchecking the box that says Protect Content.

 

--------------------------------------------------------------------------------

 

Protect your identity

 

Like many other audio players, Windows Media Player rushes out to the Internet to find information for you when you play a CD. Some of this information, such as song titles and album art, is useful, but Media Player also identifies your copy of Media Player to the site where it's getting data. Why? According to the help file, "The server uses this unique identifier to monitor your connection. By monitoring your connection, the server can make adjustments to increase the playback quality and to alert you about events that occur when receiving streams over the Internet."

If you're disturbed by this exchange of information, here's how to stop it. In Windows Media Player, click Tools > Options and go to the Player tab. Notice the option that says "Allow Internet sites to uniquely identify your player?" Turn it off.

 

 

Share this post


Link to post
Share on other sites

Group and Ungroup Similar Taskbar Items

 

Just open three or four Internet Explorer windows and you won't see them all in a row on your Taskbar, as you did in previous versions of Windows. By default, Windows XP groups similar items on one button. For example, if you have 3 Internet Explorer windows open, you'll see an Explorer item with the number 3 on it. Click it to see a pop-up list of those windows, then select the one you want.

If you would like, Windows XP will display all open windows separately on the Taskbar. Right click a blank area of the Taskbar and select Properties. Under Taskbar Properties, deselect Group Similar Taskbar Buttons, then click OK.

 

--------------------------------------------------------------------------------

 

Turn back the clock

 

Gray is definitely out. The folks at Microsoft bathed Windows XP in color. Don't like XP's look? To switch back to the Classic look that resembles Windows 2000, right-click the desktop, select Properties, click the Themes tab, and choose Windows Classic from the drop-down list. Voilà! You're back to comfy shades of blue and gray--not to mention having all those familiar icons.

Click "Switch to Classic view" in the upper-left corner of the Properties dialog to bring back the familiar Control Panel icons of earlier versions of Windows. To get back to a Start menu that looks more like Windows 2000's, right-click in an empty portion of the Start menu's left-hand column, select Properties, and go to the Start Menu tab. Select Classic Start Menu. To bring the new look back, just reverse these steps.

 

--------------------------------------------------------------------------------

 

Customize the Start menu

 

The Start menu gets more real estate in XP than in previous versions, and it's more customizable. To make the Start menu display only the applications you want, rather than the default determined by Microsoft, right-click in an empty section of the Start menu's left column, and select Properties > Start Menu > Customize. Here you'll find a list of your most frequently used programs. (XP keeps track of what you use and what you don't, then updates this list dynamically.) Don't want your boss to know that Pinball, Solitaire, and Quake all make your list? Go to the General tab, click Clear List, and set the counter to zero.

 

--------------------------------------------------------------------------------

 

Swap out the defaults

 

In XP, your favorite programs are displayed in the top left column of the Start menu. Microsoft starts you off with Internet Explorer and Outlook Express.

Want to display a different set of applications in this spot? Right-click an empty portion of the Start menu's left column and select Properties > Start Menu > Customize. At the bottom, deselect the program you no longer want displayed in the "Show on the Start menu" dialog, and, using Windows Explorer or My Computer, navigate to the program you want instead. Right-click the program and select "Pin to Start menu." To rename the new shortcut, right-click it and select Rename. Note: You can't pin files, just programs.

 

--------------------------------------------------------------------------------

 

Organize your desktop

 

The only default icon on XP's desktop is the Recycle Bin, but we think it's a good idea to add a shortcut to Computer Management, a quick and dirty way to get to such important tools as the Event Viewer, Local Users and Groups, Shared Folders, the Device Manager, and Disk Management. To surface this handy management dialog, click Start > Control Panel > Performance and Maintenance > Administrative Tools. Right-click the Computer Management shortcut. Select Copy from the dialog menu. Right-click an empty portion of the desktop and select Paste Shortcut. Use this procedure to add shortcuts to anything else; use Windows Explorer or My Computer to find your target

 

--------------------------------------------------------------------------------

 

Turn on your firewall

 

Microsoft included a firewall in Windows XP to keep you safe from hackers while you cruise the Internet. How do you know that the Internet Connection Firewall is on? Go to the Control Panel and double-click the Network Connections icon. In the dial-up, DSL, or cable connection dialog that appears, check the Status column. If your firewall is on, it should say Firewalled. You can turn the firewall off with the check box, but unless you are going to add a third-party firewall for heightened security, it's best to leave it on.

Now that you know that your firewall is on, how do you know that it's doing its job? Test it with ShieldsUp, the free testing service sponsored by Gibson Research. According to our tests, XP's Internet Connection Firewall kept the computer in full stealth mode. Hackers could not break in and couldn't even see the computer online.

But, given the latest security problems with USB 2.0, etc, you should always go to Windows Update to make sure you have the latest patches, no matter what operating system you use.

 

 

Share this post


Link to post
Share on other sites

Computer or software acting up? Need low cost Technical Help? Want FREE help to learn a

program? Printer or CD Writer broken?

 

The Newbie Club now has 90 FULL TIME trained technicians on hand to advise you - at 8 cents a day. Their new site is now bigger and better than ever with so many Free Tutorials, Courses eBooks and Expert Articles, it will make your head shake in disbelief. And Membership is TOTALLY FREE. Go see what they're offering at TheNewbieClub You just won't believe it!

AD

 

--------------------------------------------------------------------------------

 

Internet Connection Sharing

 

To enable Internet Connection Sharing on a network connection:

Open Network Connections.

Click the dial-up, local area network, PPPoE, or VPN connection you want to share, and then, under Network Tasks, click Change settings of this connection.

On the Advanced tab, select the Allow other network users to connect through this computer's Internet connection check box.

If you want this connection to dial automatically when another computer on your home or small office network attempts to access external resources, select the Establish a dial-up connection whenever a computer on my network attempts to access the Internet check box.

If you want other network users to enable or disable the shared Internet connection, select the Allow other network users to control or disable the shared Internet connection check box.

Under Internet Connection Sharing, in Home networking connection, select any adapter that connects the computer sharing its Internet connection to the other computers on your network.

 

--------------------------------------------------------------------------------

 

Watch your cookies

 

In XP, the Documents And Settings folder holds all user information, including configuration settings, favorites, and cookies. The Documents And Settings\Username\Cookies folder is where XP stashes cookies. How do you control the number of cookies you allow on your system? Click Start > Control Panel > Network And Internet Connections > Internet Options. Click the Privacy tab, then use the slider bar to modify your cookie settings. For instance, you can block cookies from sites that use personal identification without your consent. To increase your security, try out the other privacy settings in this dialog. The lowest level is Accept All Cookies while the highest is Block All Cookies, with low, medium, medium-high, and high settings in between. (An explanation of each appears as you move between settings.) Keep in mind that rejecting cookies may limit your actions on some Web sites, and some sites use cookies to track how many times you see a popup, for example, on this website, if you blocked cookies, you would see a popup on every page.

 

--------------------------------------------------------------------------------

 

 

 

Reduce Temporary Internet File Space

 

The temporary internet files clutter your hard drive with copies of each page visited. These can build up over time and take up disk space. Even more bothersome is that instead of getting new pages each time IE often takes the page out the temp internet files. This can be a problem if you are viewing a website that is updated all the time. If you are on a slow connection such as a 56K or lower then this can be good but if you are on a fast broadband connection, like me, then you can get away with decreasing the size of your temp internet files to just one meg without any performance decrease.

 

--------------------------------------------------------------------------------

 

Launch Internet Explorer.

 

Select the Tools from the menu bar. Then select Internet Options... from the drop down menu. Once the internet options has loaded click on the general tab. Under the temporary internet files section click the settings button. A settings window will load. Slide the slider all the way to the left so the size indicated in the text box on the right is one. Click OK Click Ok

 

 

I ALREADY SAID YOU TO BE PATIENT

Share this post


Link to post
Share on other sites

Turn Off System Recovery

 

Right click on My Computer and choose Properties. Click on the System Restore tab and check the box Turn off System Restore. (This will increase Windows performance & save disk space)

 

--------------------------------------------------------------------------------

 

Enable / Disable Firewall

 

Open Control Panel and double click on Network Connections. In the new box that appears right click on the Connection and click on the Advanced tab. Check or uncheck the box according to your desire.

 

--------------------------------------------------------------------------------

 

Win XP Won’t Completely Shutdown

 

Goto Control Panel, then goto Power Options.

Click on the APM Tab, then check the "Enable Advanced Power Management support."

Shut down your PC. It should now successfully complete the Shut Down process.

 

--------------------------------------------------------------------------------

 

WinXP Clear Page file on shutdown

 

Go to Control panel Administrative tools, local security policy. then goto local policies ---> security options. Then change the option for "Shutdown: Clear Virtual Memory Pagefile"

 

--------------------------------------------------------------------------------

 

Turn off hibernation

 

Control Panel-Screen Saver Power-Hibernate Tab-uncheck hibernation box-reboot and hiberfil.sys is no more.

 

--------------------------------------------------------------------------------

 

Adjust various visual effects

 

Open up the control panel

Go under system and click on the advanced tab

Click settings under Performance options

You can now change various graphical effects (mainly animations and shadows)

 

--------------------------------------------------------------------------------

 

Disable error reporting

 

Open Control Panel

Click on Performance and Maintenance.

Click on System.

Then click on the Advanced tab

Click on the error-reporting button on the bottom of the windows.

Select Disable error reporting.

Click OK

Click OK

 

--------------------------------------------------------------------------------

 

Close Multiple Windows : Note works in all versions of Windows

 

If you just opened a number of separate, related windows (a folder inside a folder, and so on), there's an easier way to close them all than one-at-a-time. Hold down the Shift key as you click the X caption button in the upper-right corner of the last window opened. Doing so closes that window and all windows that came before it.

 

--------------------------------------------------------------------------------

 

Remove shortcut arrow from desktop icons

 

Here's how you can remove those shortcut arrows from your desktop icons in Windows XP.

Start regedit.

Navigate to HKEY_CLASSES_ROOTlnkfile

Delete the IsShortcut registry value.

You may need to restart Windows XP.

 

--------------------------------------------------------------------------------

 

Remove Shared Documents

 

Open Regedit(Start- Run- Regedit) and navigate to HKEY_LOCAL_MACHINE SOFTWARE Microsoft Windows CurrentVersion Explorer My Computer NameSpace DelegateFolders There will see a sub-key named {59031a47-3f72-44a7-89c5-5595fe6b30ee}. By Deleting this you can remove the 'Other Files stored on This Computer' group.

 

--------------------------------------------------------------------------------

 

Change the text in Internet Explorers title bar to anything you want

 

In regedit navigate to this key:

HKEY_CURRENT_USERSoftwareMicrosoftInternet ExplorerMain

change the value of the string "Window Title" to whatever you want on the title bar of Internet Explorer - to have no title except the title of the web pages you are browsing do not enter anything for a value.

 

--------------------------------------------------------------------------------

 

Easy sendto menu modification

 

first open - Xocuments and SettingsusernameSendTo (it is hidden) where X is your drive letter and username is your username make and delete shortcuts to folders at will

 

Share this post


Link to post
Share on other sites

Turn of CD Auto Play

 

Open My Computer

Right click on your CD ROM and choose Properties

Click on the Auto Play tab

In the drop down box you can choose the Action for each choice shown in the drop down box

Or

Go to Start->Run->gpedit.msc

Computer Config -> Administrative Template -> System

Double click Turn off Autoplay

Enable it.

--------------------------------------------------------------------------------

 

Increase your cable modem or DSL speed in XP

 

This tweak is for broad band cable connections on stand alone machines with winXP professional version - might work on Home version also. It will probably work with networked machines as well but I haven't tried it in that configuration. This is for windows XP only, it does not work on win2000.

I use 3 Com cards so I don't know how it works on others at this point. It does not involve editing the registry. This tweak assumes that you have let winXP create a connection on install for your cable modem/NIC combination and that your connection has tcp/ip - QoS - file and print sharing - and client for microsoft networks , only, installed. It also assumes that winxp will detect your NIC and has in-box drivers for it. If it doesn't do not try this.

In the "My Network Places" properties (right click on the desktop icon and choose properties), highlight the connection then at the menu bar choose "Advanced" then "Advanced Settings". Uncheck the two boxes in the lower half for the bindings for File and Printer sharing and Client for MS networks. Click OK

From the windows XP cd in the support directory from the support cab, extract the file netcap.exe and place it in a directory on your hard drive or even in the root of your C:\ drive.

next, open up a command prompt window and change directories to where you put netcap.exe. then type "netcap/?". It will list some commands that are available for netcap and a netmon driver will be installed. At the bottom you will see your adapters. You should see two of them if using a 3Com card. One will be for LAN and the other will be for WAN something or other.

Next type "netcap/Remove". This will remove the netmon driver.

Open up control panel / system / dev man and look at your network adapters. You should now see two of them and one will have a yellow ! on it. Right click on the one without the yellow ! and choose uninstall. YES! you are uninstalling your network adapter, continue with the uninstall. Do not restart yet.

Check your connection properties to make sure that no connection exists. If you get a wizard just cancel out of it.

Now re-start the machine.

After re-start go to your connection properties again and you should have a new connection called "Local area connection 2". highlight the connection then at the menu bar choose "Advanced" then "Advanced Settings". Uncheck the two boxes in the lower half for the bindings for File and Printer sharing and Client for MS networks. Click OK.

Choose connection properties and uncheck the "QOS" box

Re-start the machine

after restart enjoy the increased responsivness of IE, faster page loading, and a connection speed boost.

Why it works, it seems that windows XP, in its zeal to make sure every base is covered installs two seperate versions of the NIC card. One you do not normally see in any properties. Remember the "netcap/?" command above showing two different adapters? The LAN one is the one you see. The invisible one loads everything down and its like your running two separate cards together, sharing a connection among two cards, this method breaks this "bond" and allows the NIC to run un-hindered.

 

 

Share this post


Link to post
Share on other sites

Use a Shortcut to Local Area Network Connection Information

 

Something new in Windows XP, instead of using the command line program and typing ipconfig to find local area network information, you can use the following shortcut:

Click Start, point to Connect to, and then click Show All Connections.

Right–click the connection you want information about, and then click Status.

In the connection Properties dialog box, click the Support tab.

For even more information, click the Advanced tab.

To automatically enable the status monitor each time the connection is active, in the connection Properties dialog box, select the Show icon in taskbar notification area when connected check box.

 

--------------------------------------------------------------------------------

 

Change the Start Menu Style

 

Does the new Windows XP Start menu take up too much space on your desktop? You can easily change the look back to the Windows Classic Start menu by following these steps:

Right–click the Start button, and then click Properties.

Click Classic Start menu.

Click the Customize button to select items to display on the Start menu.

By default, selecting the Classic Start menu also adds the My Documents, My Computer, My Network Places, and Internet Explorer icons to your desktop.

 

--------------------------------------------------------------------------------

 

Add a Map Drive Button to the Toolbar

 

Do you want to quickly map a drive, but can’t find the toolbar button? If you map drives often, use one of these options to add a Map Drive button to the folder toolbar.

Option One (Long Term Fix)

Click Start, click My Computer, right-click the toolbar, then unlock the toolbars, if necessary.

Right-click the toolbar again, and then click Customize.

Under Available toolbar buttons, locate Map Drive, and drag it into the position you want on the right under Current toolbar buttons.

Click Close, click OK, and then click OK again.

You now have drive mapping buttons on your toolbar, so you can map drives from any folder window. To unmap drives, follow the above procedure, selecting Disconnect under Available toolbar buttons. To quickly map a drive, try this option.

Option Two (Quick Fix)

Click Start, and right-click My Computer.

Click Map Network Drive.

If you place your My Computer icon directly on the desktop, you can make this move in only two clicks!

 

--------------------------------------------------------------------------------

 

Do Not Highlight Newly Installed Programs

 

Tired of that annoying little window that pops up to tell you that new software is installed? If it gets in the way when you’re logging off, turn it off completely.

To do this Click Start, right-click at the top of the Start menu where your name is displayed, and then click Properties.

In the Taskbar and Start Menu Properties dialog box, on the Start Menu tab, click Customize.

Click the Advanced tab, and then clear the Highlight newly installed programs check box.

Click OK, and then click OK again.

Now that message won’t be popping up when you least want to see it.

 

--------------------------------------------------------------------------------

 

Speed up the Start Menu

 

You can use this tip to speed up the Start Menu in Windows XP release candidate 1. You can customize the speed of the Start Menu by editing a Registry Key.

Click Start, and then click Run.

Type Regedit in the box, and then click OK.

Expand the menu in the left panel and select the HKEY_CURRENT_USER\Control Panel\Desktop folder.

Scroll down in the right panel and double click on the MenuShowDelay file.

In the Value Data box, change to default value for the menu speed from 400 to a lesser number, such as 1.

Click OK.

Caution: Incorrectly editing the registry may severely damage your system. Before making

changes to the registry, you should back up any valued data on your computer.

 

 

Share this post


Link to post
Share on other sites

 

 

Stop Password Expiration

 

After you have run Windows XP for a while, you may receive this message when you log

on: "Your password will expire in 14 days.....".

By default, Windows XP is set up with passwords which will expire after 42 days. 14 days in advance, Windows will start warning you of this fact. If you do not want your passwords to expire:

Go to Start > Run and in the Open: box type control userpasswords2

Select the Advanced tab in the User Accounts window

Press the Advanced button below the Advanced user management header

Select Users in the Local Users and Groups

In the right pane, right-click the user name for which you want to change the setting, and select Properties

On the General tab, check Password never expires

Click Apply and OK (all the way out)

 

--------------------------------------------------------------------------------

 

Safely Remove Hardware Icon?

 

If you have an USB device attached to your system, you will notice an icon in the Notification area, which - when clicked - will give you the option to Stop your hardware, before you unplug it.

It is possible that you never unplug this hardware. So how do you get rid of the icon? As far as I know the only way is to right-click the notification area, and selecting Properties. Under the Notification area heading, click Customize. Find the Safely Remove Hardware icon and select Always hide in the Behavior column next to it (press OK and Apply to back out).

--------------------------------------------------------------------------------

 

Multiuser features

 

Like Windows 2000, but unlike Windows 95, 98, and Me, the ability to log in multiple users simultaneously plays a big role in Windows XP. There is a default Administrator account set up when Windows XP is first installed, but you can create as many accounts as you need later, depending on how many people will be using the machine. Each user, once he or she has an account, can customize XP to his or her liking. Individual users get their own subfolders in the Documents And Settings folder; this folder serves as a centralized location for most personalized information, such as the Start Menu, Favorites, and Documents settings.

 

--------------------------------------------------------------------------------

 

Missing Administrator account

 

Once you have created regular user accounts, the default Administrator account vanishes from the Welcome screen, which you see when the computer starts up. Press Ctrl-Alt-Delete twice at the Welcome screen to retrieve the standard logon dialog. You can log on as Administrator from here. To switch among accounts, just click the Log Off button on the Start menu. You'll then see the Log Off Windows dialog box. Click the Switch User button, and you'll be taken to the Welcome screen where you can select and log on to other accounts.

--------------------------------------------------------------------------------

 

Show yourself

 

Only the Administrator can set up new user accounts (go to Control Panel > User Accounts > Create A New Account). You can select a picture to identify the account. When you're logged on to the system under your username, this picture, along with your username, peeks out at you from the top of the Start menu. There are a slew of 48x48-pixel bitmap images to choose from within XP. They're housed in D:\Documents And Settings\All Users\Application Data\Microsoft\User Account Pictures\Default Pictures. But why limit yourself? You can also copy any graphic you want into this folder or browse for another from your hard drive. Usable file types are BMP, GIF, JPEG, or PNG. However, always use a square picture, to limit the white space on the side. Your image can be any size but will be displayed as 48x48-pixel image, so a close-up works best.

 

--------------------------------------------------------------------------------

 

Hide yourself

 

Once you've created a user account, password-protect it to keep other users from viewing your files, Favorites, and cookies. Why? You may not want your child to see the note that you're sending to his or her teacher, or you may be planning someone's surprise party. (Note: Anyone with an Administrator account can still see them.)

Worried about remembering your password? Create a hint to help you when you initially create it by following the prompts during setup. XP stores the password hints in the Registry at Hkey_local_machine\Software\Microsoft\Windows\Curr

ent Version\Hints.

What if the hint doesn't help? Any user or Administrator can create a password reset disk, which you can use to log on and create a new password. Go to Control Panel > User Accounts and select "Prevent a forgotten password" in the Related Tasks box on the left. Follow the wizard's instructions. After creating the disk, find a safe place for it. Don't forget the password or where you put the disk. Someone else could use it to change your password without you knowing it.

 

Share this post


Link to post
Share on other sites

Create a Password Reset Disk

 

Microsoft has enhanced security features in XP including the the ability to create a floppy diskette to recover your password incase it is forgotten.

Click Start

Click Control Panel

Click User Accounts

Click on the account which you want to create a password disk

Click Prevent a forgotten password which starts the Forgotten Password Wizard . This is found under Related Tasks

Insert a blank, formatted disk into drive A, and click Next

Enter the password in the Current user account password box

To use the recovery disk, at the Welcome screen

Click the user name whose password is on the recovery disk

Click the question mark button

This causes the Did you forget your password message to appear.

Click use your password reset disk

This will start the Password Reset Wizard.

From this point, just follow the wizard's instructions and you will be able to set a new password. It is different if you are part of a domain, see next tip.

 

--------------------------------------------------------------------------------

 

How to Create a Password Reset Disk for computers that are part of a domain

 

Note that this procedure requires one blank, formatted floppy disk.

To create a password reset disk for your local user account:

Press CTRL+ALT+DELETE. The Windows Security dialog box appears.

Click Change Password . The Change Password dialog box appears.

In the Log on to box, click the local computer. For example, click Computer (this computer) .

Click Backup . The Forgotten Password Wizard starts.

On the "Welcome to the Forgotten Password Wizard" page, click Next .

Insert a blank, formatted disk in drive A, and then click Next .

In the Current user account password box, type your password, and then click Next . The Forgotten Password Wizard creates the disk.

When the progress bar reaches 100 percent complete, click Next , and then click Finish . The Forgotten Password Wizard quits and you return to the Change Password dialog box.

Remove, and then label the password reset disk. Store the disk in a safe place.

In the Change Password dialog box, click Cancel .

In the Windows Security dialog box, click Cancel.

If you forget your password, you can log on to the computer with a new password that you create by using the Password Reset Wizard and your password reset disk.

To gain access to your local user account on a computer that is a member of a domain, or has been disconnected from a domain:

In the Welcome to Windows dialog box, press CTRL+ALT+DELETE.

In the Log On to Windows dialog box, type an incorrect password in the Password box, and then click OK .

In the Logon Failed dialog box that appears, click Reset . The Password Reset Wizard starts. The Password Reset Wizard lets you create a new password for your local user account.

On the "Welcome to the Password Reset Wizard" page, click Next .

Insert the password reset disk in drive A, and then click Next .

On the "Reset the User Account Password" page, type a new password in the Type a new password box.

Type the same password in the Type the password again to confirm box.

In the Type a new password hint box, type a hint that will help you remember the password if you forget it. NOTE : This hint is visible to anyone who attempts to log on to the computer by using your user account.

Click Next , and then click Finish . The Password Reset Wizard quits and you return to the Log On to Windows dialog box. The password reset disk is automatically updated with the new password information. You do not have to create a new password reset disk.

In the Log On to Windows dialog box, type your new password in the Password box.

In the Log on to box, click the local computer. For example, click Computer (this computer) , and then click OK . You are logged on to the local computer with your local account information.

 

 

Share this post


Link to post
Share on other sites

Disable Automatic Windows Update

 

Windows XP is configured out of the box to routinely scan for and download updates to Windows XP automatically. While this can be somewhat convenient for those with very fast Internet connections and those who would otherwise forget to check for updates, it can be a nuisance for the rest of us, who are still using 56k or, even worse 33k modem connections.

To control or disable automatic updating, open the System icon in Control Panel (or right-click My Computer and select Properties), and choose the Automatic Updating tab.

To check for updates manually, open Internet Explorer and select Windows Update from the Tools menu.

 

--------------------------------------------------------------------------------

 

Try automatic camera recognition in windows xp

 

If you have a digital camera, try this trick for downloading pictures to your machine. Don't load any of the drivers or software that comes with your digital camera. Instead--if your camera supports USB--connect your camera via a USB port. There's a good chance that Windows XP will recognize the digicam. After a few moments, the Scanner And Camera Wizard should start up and walk you through the steps involved in copying your pictures from the camera to a folder of your choice on your computer--much faster than doing it manually. You may still need to install your camera's software if it provides configuration controls you can't access in any other way, such as those for changing the picture resolution on your camera or the software's special editing functions.

 

--------------------------------------------------------------------------------

 

HOW TO: Use Automatic Completion with a Command Prompt in Windows XP

 

To Activate Automatic Completion

For example, to change to the Program Files folder, you can type cd \pro control_character. Or, to display the contents of the Myfile.txt file, you can type type myf control_character. If there are multiple folders or files that match the characters you type, typing the control character again displays the next matching instance. When the correct folder or file is displayed, press ENTER to complete the command. If no folder of file matches the characters that you type, you hear a beep. You can activate or deactivate this feature for a computer, for a user, or for only the current command session.

 

--------------------------------------------------------------------------------

 

Easy CD Creator 5.0 Does Not Function In Windows XP

 

When you try to use Roxio Easy CD Creator 5.0, any of the following symptoms may occur:

Your computer may stop responding (hang) or may stop functioning correctly.

You may receive an error message on a blue screen. The error message may be similar to:

Stop 0x00000050: PrtSeqRd deferencing null device object

After you receive this error message, your computer restarts.

You may receive an error message that is similar to:

Createcd50.exe has encountered a problem and needs to close. We are sorry for the inconvenience.

 

--------------------------------------------------------------------------------

 

Damaged Registry Repair and Recovery in Windows XP

 

When a registry hive becomes damaged, your computer may become unbootable, and you may receive one of the following Stop error messages on a blue screen:

Unexpected Shutdown

Stop:0xc0000135

Registry damage often occurs when programs with access to the registry do not cleanly remove temporary items that they store in the registry. This problem may also be caused if a program is terminated or experiences a user-mode fault.

 

 

Share this post


Link to post
Share on other sites

It has got much of the self know-how about 'XP'. There was even more when you had some problem regarding 'XP' you could just give a brief look but since the posting spcae is very few I am annoyed reducing the post and I do not want to post mre than this for now.

 

Cheers.

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.